Matek Systems Pdb Xt60 W/ Bec 5V & 12V 2Oz Copper For Rc Helicopter

Description - The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. - It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. - It offers a XT60 socket to connect the LiPo pack conveniently. Feature 2oz copper, 4-layers &1.6mm PCB. Built-in XT60 Socket Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant Specifications General: - Input voltage range (3S-4S LiPo operation): 9 - 18V DC - Regulated 5V and 12V outputs - LED power indicators ( 5V & 12V outputs ) - 6 ESC outputs & 1 pair VCC/GND pads ESC outputs: - Continuous current: 25A*4 or 15A*6 - Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: - Designed for RC Receivers, Flight controllers, OSD, and Servos. - DC/DC synchronous buck regulator. - Voltage: 5.0 plus/- 0.1VDC - Continuous current: 2 Amps (Max.2.5A 10s/minute) - Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) - Short-circuit tolerant (5 seconds/minute) BEC 12V output: - Designed for Video TX or FPV camera with linear regulator. - The battery should be 4S LiPo (13 to 18V DC) - Voltage: 12.0 plus/- 0.3VDC - Continuous current: 500mA (Max.0.8A 5s/minute) - Short-circuit tolerant (2 seconds/minute) BEC 12V @ 3S LiPo - Output voltage= 3S LiPo voltage -1V Physical: - Dimensions: 36 x 50 x 4 mm (without XT60) - Mounting: 30.5 x 30.5mm, 3mm - Weight: 7.5g(w/o XT60), 11g(w/ XT60) Package included: 1 x Matek Systems PDB-XT60 The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.