ENGINEER Engineer GT Drive Screw Bazoo Cassette DZ-76

[Product Infomation]

Brand : Materials :

[Product Description]

- A set of GT Drive (DZ-70) and a 4-piece screw bazooka (DBZ-22) that allows you to remove crushed Phillips screws without hitting them. - Unique tip shape allows you to remove crushed Phillips screws. ・The bit for minor injuries can be used to remove crushed screws without hitting them. The bit for severe cases can be removed by hitting the crushed screw with a hammer. - Comes with a bolster (13 mm across opposite sides), allowing you to turn screws powerfully. The insertion port has been machined with high precision so there is little gap between it and the bit, suppressing wobbling during work. ・Compatible screws: Screws compatible with driver No. 0, No. 1, No. 2 / Total length: 194 mm / Weight: 251 g

A set of GT Drive (DZ-70) and a 4-piece screw bazooka (DBZ-22) that allows you to remove crushed Phillips screws without hitting them.

【Features】 The unique tip shape allows you to remove crushed screws. The bit for minor injuries can be used to remove crushed screws without hitting them. The bit for severe cases can be removed by hitting the crushed screw with a hammer. Comes with a bolster (width across flats 13mm), allowing you to turn screws powerfully. A penetrating grip that can be used to tap and loosen screws that are stuck due to rust. The insertion port has been machined with high precision so there is little gap between it and the bit, suppressing wobbling during work. Comes with a dedicated bit holder for convenient storage and carrying. *It may not be possible to use this product on screws that are completely fixed due to rust or adhesive.

[Application] For removing crushed Phillips screws. For on-site repairs, maintenance, car, motorcycle, and bicycle maintenance, and do-it-yourself work.

[Specs] Set points: 5 Set contents: DBZ-58, 57, 51, 52, DZ-70 Compatible screws: Screws compatible with driver No.0, No.1, No.2 Opposite side: 6.35mm Bit total length: 105mm Total length: 194mm Grip diameter: 38mm Weight: 251g Material: Bit/carbon steel, grip/elastomer & PP & iron, bit holder/elastomer

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. The English version of the manual can be downloaded from our website.